QUALITY AND INNOVATION

As the complex modern market demands, the Plafesa Group is strongly committed to quality and supports this through research at our R&D&I centres and thereby implementing quality in all spheres of our activity. Over the last four decades we have understood the importance of incorporating all the tools within our reach in order to improve, day after day, our range of products and thereby provide added value to our clients.

The Plafesa Group has an automated industrial process where it employs a team of highly-qualified professionals to guarantee the satisfactory growth of our clients, investing strongly and constantly in our quality systems, management tools for the prevention and minimisation of environmental impacts and of the risks that arise in our activity.

Our unconditional commitment to investments in new industrial technologies (the acquisition of new cutting lines according to market demand), in the implementation of new IT and communications systems (which make it possible to have product traceability and integration between all the levels of the business), and a commitment to quality standards, have given the Group an added value for our clients and an opportunity for growth in recent years.

Logistics

Aware of the incredibly important role that logistics plays in the satisfaction of its clients, the Plafesa Group considers it to be a decisive factor in profitability, which links the needs of the current market and the operating activity of the Group’s companies.

Information Systems

The Plafesa Group uses leading brands, which over the years have provided us with the quality, security and trust for the continuous growth of our already long voyage.

Management systems

The policy of the Plafesa Group shows a commitment to management in the implementation of the requirements of the quality management system, in accordance with NP EN ISO 9001 and ISO 14001 standards, adapted to the organisation in order to establish…

Quality Controls

The Plafesa Group is totally committed to achieving global quality. This is not just the responsibility of the technical or production sectors; it is the responsibility of everyone in general and each person in particular.

Safety Controls

For the Plafesa Group, the safety of its workers, clients and other stakeholders and its improvement are essential factors for the guaranteed growth of the company.

Environmental Policy

The Plafesa Group is aware of the impact of its activity on the environment and recognises the effect that it has for its protection. Therefore, and in compliance with the legal requirements in force, it acts responsibly in order to minimise the negative impacts that…

Quality Certificates

The quality and environmental management system of the Plafesa Group is certified by LRQA – Lloyd’s Register Quality Assurance, in accordance with the NP EN ISO 9001 and ISO 14001 standards.

	C (%)	Mn (%)	P (%)	S (%)	SI (%)	AI (%)	Nb (%)	Ti(%)
S220GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S250GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S280GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S320GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S350GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S390GD +Z ETA -13/0257*	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S390GD +ZEN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S420GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S450GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–
S550GD +Z EN 10346	≤ 0,200	≤ 1,70	≤ 0,100	≤ 0,045	≤ 0,60	–	–	–

	C (%)	Mn (%)	P (%)	S (%)	SI (%)	AI (%)	Nb (%)	Ti(%)
DX51D +Z EN 10346	≤ 0,180	≤ 1,20	≤ 0,120	≤ 0,045	≤ 0,50	–	–	≤ 0,300
DX52D +Z EN 10346	≤ 0,120	≤ 0,60	≤ 0,100	≤ 0,045	≤ 0,50	–	–	≤ 0,300
DX53D +Z EN 10346	≤ 0,120	≤ 0,60	≤ 0,100	≤ 0,045	≤ 0,50	–	–	≤ 0,300
DX54D +Z EN 10346	≤ 0,120	≤ 0,60	≤ 0,100	≤ 0,045	≤ 0,50	–	–	≤ 0,300
DX56D +Z EN 10346	≤ 0,120	≤ 0,60	≤ 0,100	≤ 0,045	≤ 0,50	–	–	≤ 0,300
DX57D +Z EN 10346	≤ 0,120	≤ 0,60	≤ 0,100	≤ 0,045	≤ 0,50	–	–	≤ 0,300

	C (%)	Mn (%)	P (%)	S (%)	SI (%)	AI (%)	Nb(%)	Ti(%)	Galvanizado
HC260LA EN 10268	≤ 0,10	≤ 1,0	≤ 0,030	≤ 0,025	≤ 0,5	≥ 0,015	≥ 0,09	≤ 0,15	–
HC300LA EN 10268	≤ 0,12	≤ 1,4	≤ 0,030	≤ 0,025	≤ 0,5	≥ 0,015	≥ 0,09	≤ 0,15	–
HC340LA EN 10268	≤ 0,12	≤ 1,5	≤ 0,030	≤ 0,025	≤ 0,5	≥ 0,015	≥ 0,09	≤ 0,15	–
HC380LA EN 10268	≤ 0,12	≤ 1,6	≤ 0,030	≤ 0,025	≤ 0,5	≥ 0,015	≥ 0,09	≤ 0,15	–
HC420LA EN 10268	≤ 0,14	≤ 1,6	≤ 0,030	≤ 0,025	≤ 0,5	≥ 0,015	≥ 0,09	≤ 0,15	–
HC460LA EN 10268	≤ 0,14	≤ 1,8	≤ 0,030	≤ 0,025	≤ 0,6	≥ 0,015	≥ 0,09	≤ 0,15	–
HC460LA EN 10268	≤ 0,14	≤ 1,8	≤ 0,030	≤ 0,025	≤ 0,6	≥ 0,015	≥ 0,09	≤ 0,15	–

	C (%)	Mn (%)	P (%)	S (%)	SI (%)	AI (%)	Nb (%)	Ti(%)
HX260LAD +Z EN 10346	≤ 0,110	≤ 1,00	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤ 0,090	≤ 0,150
HX300LAD +Z EN 10346	≤ 0,120	≤ 1,40	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤ 0,090	≤ 0,150
HX340LAD +Z EN 10346	≤ 0,120	≤ 1,40	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤0,100	≤ 0,150
HX380LAD +Z EN 10346	≤ 0,120	≤ 1,50	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤0,100	≤ 0,150
HX420LAD +Z EN 10346	≤ 0,120	≤ 1,60	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤0,100	≤ 0,150
HX460LAD +Z EN 10346	≤ 0,150	≤ 1,70	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤0,100	≤ 0,150
HX500LAD +Z EN 10346	≤ 0,150	≤ 1,70	≤ 0,030	≤ 0,025	≤ 0,50	≥ 0,015	≤ 0,100	≤ 0,150

	C (%)	Mn (%)	P (%)	S (%)	SI (%)	AI (%)	Mo (%)	Nb(%)	V (%)	Ti(%)	B (%)	C (%)	Galvanizado
S315MC	≤ 0,120	≤ 1,30	≤ 0,025	≤ 0,020	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S355MC	≤ 0,120	≤ 1,50	≤ 0,025	≤ 0,020	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S420MC	≤ 0,120	≤ 1,60	≤ 0,025	≤ 0,015	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S460MC	≤ 0,120	≤ 1,60	≤ 0,025	≤ 0,015	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S500MC	≤ 0,120	≤ 1,70	≤ 0,025	≤ 0,015	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S550MC	≤ 0,120	≤ 1,80	≤ 0,025	≤ 0,015	≤ 0,50	≥ 0,015	–	≤ 0,090	≤ 0,200	≤ 0,150	–	–	No
S600MC	≤ 0,120	≤ 1,90	≤ 0,025	≤ 0,015	≤ 0,50	≥ 0,015	≤ 0,50	≤ 0,090	≤ 0,200	≤ 0,220	≤ 0,0050	–	No